20 PSI ELECTRIC SUPER 12V ISUP AND WATER SPORT Aqua Marina sold by JUMANA BOARDS

C$249.00 C$199.00

NEW VERSION 2021
20 PSI ELECTRIC SUPER 12V ISUP AND WATER SPORT Aqua Marina

20 PSI INFLATOR / DEFLATOR

- IDEAL FOR OUTDOOR USE AND HIGH PRESSURE INFLATABLES

- EXTENDED ALLIGATOR CLIPS CABLE FOR LONGER REACH

- HIGH VOLUME AIR FLOW FOR QUICK INFLATION & DEFLATION

- WIDE RANGE OF PRESSURE SETTING UP TO 20 PSI MAX. OUTPUT PRESSURE (DC 12V, 110W, CAR CHARGER, FOR CAR BATTERY OR CIGARETTE LIGHTER)

- LCD SCREEN

- INFLATE: 2 PSI / MIN

- DEFLATE: 4 PSI / MIN

PACKAGE DIMENSIONS: 16” x 7” x 8”

**Don't keep the air pump working for more than 20 mins, because motor overheating may cause internal damage. The air pump shall be fully cooled for 30 mins after continuously working up to 20 mins.**

Safety Instructions

* Warning: To reduce the risk of injury, do not let children use it. Always supervise children and those who are incapacitated.

* Warning: This product is not suitable for people with reduced physical strength, sensory ability or mental faculty, people who lack skills and people with intellectual disabilities, unless they are under the protection of a guardian and are supervised and guided.

* Warning: Unplug the DC power before moving, maintaining, repairing or adjusting this product

* Warning: Do not bury the wire in soil. It shall be placed in the safe zone where it won't be damaged by mower or other equipment.

* Warning: If the power cord is damaged, it must be replaced by the manufacturer or its service agent or similar authorized personnel to avoid danger.

* Warning: If you are standing in a place with water or your hands are wet, please don't operate the power plug.

* Warning: Check the maximum air pressure of the inflatable product before inflating. The air bag can be damaged by exceeding the Max. air pressure.

* Warning: Check the cigarette lighter socket before use to ensure that there is no rust or residue inside. The poorly conductive Cigarette lighter socket may cause overheating of the product or power supply, which may damage the product.

* Warning: The purpose of using this product is limited to the description described in the manual.

* Warning: Do not use this device in an ambient temperature above 40℃.

* Warning: The air pipework for this product is only applicable to the original hoses.

* Warning: Before use, check whether the air pipe is broken, whether the switch is normal, and whether the cigarette lighter can be energized normally.

* Warning: Avoid high temperatures, humidity, dust and direct exposure to sunlight.

* Warning: The maximum noise: 85dBi

Inflation Operation

* Connect the end with flexible conduit adapter of the hose to the air pump inflation inlet ①, and twist clockwise to tighten it as Figure 1.

* Install the other end of the hose into the supporting air tap of the air bag (step 1 in Figure 2).

*CONNECT CAR CIGARETTE LIGHTER PLUG INTO A DC 12V POWER SOURCE OR BY CONNECTING CAR CIGARETTE LIGHTER PLUG INTO AN ALLIGATOR CLIPS BATTERY TERMINAL TO DRAW POWER SOURCE FROM THE CAR BATTERY (CLIPS MUST BE ATTACHED).

* Press the toggle button to switch the unit of air pressure.

* Press the UP button or DOWN button to set the pressure value you need, with the range of the pressure value from 0 to 20PSI,(1PSI=0.0689BAR)

* After finishing the above steps, press the On/Off button to start inflation.

* During the inflating process, you can press the UP button or DOWN button to increase or decrease the targeted air pressure, press thE

toggle button to switch the unit of air pressure, and press the On/Off button to stop.

* Long press the On/Off button for 3 seconds to start inflation directly.

* When the air pressure reaches the set value, the air pump will stop automatically.

* When the inflation is completed, unplug the power cord.

* When not in use, remove the inflation hose from the air pump and store it properly.

Precautions

* The applied power source must be the 12V DC power source.

* Do not block the inflation inlet ① and deflation outlet ②, and ensure that the inflation inlet ① and deflation outlet ② shall remain smooth at all times.

* Observe the local waste treatment provisions, and it is not allowed to throw the air pump away randomly.

* Don't use this product when the hose is damaged.

* Don't pull out the hose when inflating, because the high pressure may hurt you.

* Don't keep the air pump working for more than 20 mins, because motor overheating may cause internal damage. The air pump shall be fully cooled for 30 mins after continuously working up to 20 mins.

* Don't use this air pump if any part is damaged. Please contact local dealer for after-sales service.

* This product shall not be exposed to the rain or immersed in water.

* The inflation inlet should not point to the face or body while working.

* Do not leave the air pump unattended while inflating.

* Do not turn off the car engine when the product is in use to avoid unnecessary damage.